SMART-I Wireless Smoke Detector Twin Pack (Model: SHDS2)

The SMART-I SHDS2 includes 2 SHDS Wireless Smoke Detectors. The SHDS detects both smoke and heat. It will trigger its built-in 85dB siren and notify the SMART-I Smart Alarm Gateway when smoke is detected. The heat sensor will trigger the the siren when the detector detects a temparature above 54°C.

It is designed for indoor use only and ceiling mounting using screws or the Double Sided Adhesive Pads provided.

The unit is battery powered and is supplied with batteries which will allow it to operate in normal use for up to 2 years. A low battery tone will be sounded by the unit periodically when the batteries need changing and the SMART-I PROTECT APP will also warn you that the batteries need changing.

The unit transmits Alerts back to the Smart Alarm Gateway using secure 868.3MHz technology.

The maximum distance between the unit and the Gateway can be up to 150 metres (Line of Sight), this can be extended by a further 150 metres using the SMART-I SHP100R Wireless Power Controller & 868.3MHz Signal Extender.

Once the Gateway receives the Alert it can be programmed to trigger camera recording, activate sirens, turn on electrical appliances/lights, send you an email or notify you on your iOS/Android device.

The SMART-I SHDS meets the EN14604:2005/AC:2008 standard for Smoke Alarm Devices.

The link feature will turn on the sirens of all the Smoke Alarms on the system even if just one is triggered.

Specifications